Sherco-250-SE-R-Factory-01Sherco-250-SE-R-Factory-02Sherco-250-SE-R-Factory-03Sherco-250-SE-R-Factory-04

Sherco 250 SE-R Factory

$14,399.00

Need More Information?

Enquire Test Ride

250 SE-R (FACTORY)

Appearing on the market in 2014, the Sherco 250 offers next generation two-stroke technology. Fitted with a very light electric-starter system ideally located to lower the center of gravity, it is no heavier than a kick-start system. An electronics unit governs the exhaust valve opening based on the ignition curve to provide an immediate response to the slightest touch on the gas.

Progressive at low throttle, force at mid-throttle, and significant power at high throttle, the Sherco two-stroke engine block is there when you need it. The chassis uses the proven formulas that made the brand’s four-stroke engines famous: rigorous directional stability alongside significant maneuverability for enduro. Fitted with an FMF exhaust and silencer the 250 SE-R is equipped with the best componentry including the new WP 48mm Xplor fork, Pyramid anti-slip seat cover, blue anodized wheel rims and Factory graphics.

Click here to view Showroom on Sherco Australia website: http://www.sherco.com.au/showroom

Small-a267824f-287f-4c47-a976-6d14fbeae196 Small-40f5ff90-a74f-4d7c-81fd-8e2926b729c0
Engine

2 stroke single cylinder with electronically controlled exhaust booster valve

Displacement

249.32 cc

Bore and Stroke

66.4 x 72 mm

Fuel System

Carburator Keihin PWK 36

Cooling System

Liquid system with forced circulation

Starter

Unique electric starting system

Ignition

Kokusan 220 W

Transmission

6 speed sequential gearbox, primary gear drive chain secondary drive

Clutch

Hydraulic multi-disc in oil bath

Exhaust

FMF chamber with stainless silencer

Frame

Chrome-Molybdenum steel semi-perimeter

Fork

48 mm tubes rebound and compression adjustable 300 mm of travel WP telescopic fork

Shock

WP progressive, multi adjustable rear shock with high and low-speed compression, rebound and spring pre-load adjustment utilizing a linkage and rod system

Brakes

Brembo hydraulically activated with 260mm front disc and 220mm rear disc

Front Tyre

90/100 – 21 inch Michelin Enduro Competition

Rear Tyre

140/80 – 18 inch Michelin Enduro Competition

Wheelbase

1480mm

Seat Height

950mm

Ground Clearance

355mm

Fuel Capacity

10.4-litres

Kerb Weight

105kg

Reviews

There are no reviews yet.

Be the first to review “Sherco 250 SE-R Factory”